HP ProCurve 600 redundant and Ext. PS
Kód: | J8168A |
Cena: | 42066 Kč (vč. DPH) |
Introduction
The ProCurve 600 Redundant and External Power Supply (RPS/EPS) has 6 RPS ports and 2 EPS ports. It can provide redundant +12 V power to any one of up to six switch products, backing up the built-in switch power supply in case of loss of AC power or a fault condition. The 600 RPS/EPS can also provide +50 VDC external Power over Ethernet (PoE) power for up to two switch devices, with a maximum PoE power supply of 408 W. The EPS can provide full power for one device or half power for two devices. Each EPS port can provide PoE power for up to 24 Ethernet PoE ports.
Features and Benefits
Additional information
Power distribution on "as needed" basis: monitors power signal from connected switch; when power from switch is no longer detected, provides power to the switch within 1 millisecond
Flexible configuration: two modes of operation: Combined Mode provides full 12 V RPS for stackables and combines the -50 V internal supply of the stackable PoE and the -50 V of the RPS/EPS unit for maximum PoE capability; RPS Mode provides RPS for the 12 V and -50 V supplies for the stackable product line
RPS device prioritization: if power to multiple connected switches fails, redundant power is provided to the highest priority switch; the lower the RPS port number, the higher the priority given
Redundant switch power (6 ports): provides redundant power to any one of up to six switch products, backing up the power supply in a switch in case of loss of AC power or a fault condition
External switch power (2 ports): provides external power to up to two PoE switch devices through two EPS ports; supports up to 15.4 W per port on 48-port stackable
Hot-plugging: supports changing the configuration of an RPS or EPS cable while the device is powered
Supports ProCurve chassis and stackable products: power supply units can be configured to support both chassis and stackable switches
Cables included: 2 m EPS cables and 1.26 m RPS cables are included for all available ports
Industry-leading warranty
Lifetime warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries)
Services
3-year, 4-hour onsite, 13x5 coverage for hardware
U9270E
3-year, 4-hour onsite, 24x7 coverage for hardware
U9271E
Technical Specifications
ProCurve 600 Redundant External Power Supply
J8168A
Ports
6 redundant power supply ports
Restrictions: Each port can provide redundant +12 V power to a
connected switch; only one port can provide power at a given time
2 external power supply ports
Restrictions: Provides +50 VDC external PoE to up to two switch
devices; provides max. of 408 W full power to one device, and half
power (204 W each) if connected to two devices
Physical
characteristics
Dimensions
12.83(d) x 17.44(w) x 1.73(h) in. (32.59 x 44.3 x 4.39 cm) (1U height)
Weight
11.78 lb. (5.34 kg), Fully loaded
Mounting
1U rack-mountable and wall-mountable enclosure using standard mounting hardware
Environment
Operating temperature
32° to 131°F (0° to 55°C)
Operating relative humidity
15% to 95% @ 104°F (40°C), non-condensing
Non-operating/
Storage temperature
–40° to 158°F (–40° to 70°C)
Non-operating/
Storage relative humidity
15% to 95% @ 149°F (65°C), non-condensing
Altitude
up to 15000 ft. (4.6 km)
Acoustic
Noise emission LwA=59.2 dB at virtual workspace, according to DIN 45635 T.19
Electrical characteristics
The unit automatically adjusts to any voltage between 100-240 V and either 50 or 60 Hz
Voltage
100–240 VAC
Current
9 A/5 A
Power consumption
800 W
RPS power
180 W
PoE power
408 W
Frequency
50/60 Hz
Safety
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950
Emissions
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A
Immunity
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated
IEC 61000-4-3; 3 V/m
EFT/Burst
IEC 61000-4-4; 1.0 kV (power line), 0.05 kV (signal line)
Surge
IEC 61000-4-5; 1 kV/2 kV AC
Conducted
IEC 61000-4-6; 3 V
Power frequency magnetic field
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
Voltage dips and interruptions
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
Provides information via port interfaces of attached devices
Supported devices
ProCurve Switch 2600-PWR series
ProCurve Switch 2800 series
ProCurve Switch 5300xl series
ProCurve Switch 3400cl series
ProCurve Switch 6400cl series
ProCurve Secure Router 7000dl series
Koupit v obchodě SALEXpocitace.cz 